STCG
Support and accessory for cable trays
Corner support bracket, 400, Hot-Dip Galvanized finish. Valid for wire mesh trays (except 60×60 size) and for blind or perforated sheet steel trays. Ceiling mounting with threaded rods. For fixing mesh trays, it requires TFRZ / TFRG screws and for sheet steel trays, it requires CTCZ612 / CTCG612 screws.
Ficha Técnica Variants
| SKU | Producto | Peso (gr.) | GTIN | Longitud | Peso |
|---|---|---|---|---|---|
| STCG100 | CROSS SUPPORT BRACKET MOUNTING HOLE H.D.G. 100 | 191 | 8427418032720 | 100mm | 0.191kg |
| STCG200 | CROSS SUPPORT BRACKET MOUNTING HOLE H.D.G. 200 | 382 | 8427418013842 | 200mm | 0.382kg |
| STCG300 | CROSS SUPPORT BRACKET MOUNTING HOLE H.D.G. 300 | 461 | 8427418013859 | 300mm | 0.461kg |
| STCG400 | CROSS SUPPORT BRACKET MOUNTING HOLE H.D.G. 400 | 593 | 8427418013866 | 400mm | 0.593kg |
| STCG500 | CROSS SUPPORT BRACKET MOUNTING HOLE H.D.G. 500 | 719 | 8427418013873 | 500mm | 0.719kg |
| STCG600 | CROSS SUPPORT BRACKET MOUNTING HOLE H.D.G. 600 | 854 | 8427418013880 | 600mm | 0.854kg |
Common features
| Ancho | mm |
| Alto | mm |
| Anchura de ranura | mm |
| Grosor del material | mm |
| Anchura del orificio | mm |
| Capacidad de carga | kN |
| Momento de inercia Iy | cm4 |
| Momento de inercia Iz | cm4 |
| Módulo resistente de la sección Wy | cm³ |
| Módulo resistente de la sección Wz | cm³ |
| Tratamiento de superficie | Galvanizado en caliente |
| Espesor de la capa de protección de superficie | µm |
